Home > PRODUCTS > Manufacturers > Cisco > Digital Receivers >

Cisco D9824 Advanced Multi Decryption Receiver
Cisco D9824 Advanced Multi Decryption Receiver


Product Code: SAD9824

Description Extended Information
The Cisco D9824 Advanced Multi Decryption Receiver (Figure 1) includes a built-in decoder that can decode an MPEG-2 or MPEG-4 Advanced Video Coding (AVC) high definition (HD) program for analog monitoring or a standard definition (SD) down-conversion for composite. Decoding of an MPEG-2 or MPEG-4 AVC SD program is also available for analog. By supporting decryption of up to 32 Cisco PowerVu encrypted programs, this single receiver allows you to efficiently receive and distribute multiple programs.
  • Four L-band inputs

    New H/W with up to 180 Mbps throughput/bandwidth

    MPEGoIP Input with Redundancy (1 MPTS or 1 SPTS)

    MPEGoIP Output with Redundancy (1 MPTS or 32 SPTS)

    DVB-S quaternary phase shift keying (QPSK) demodulation

    DVB-S2QPSK and eight phase shift keying (8PSK) demodulation

    Cisco PowerVu conditional access with Data Encryption Standard (DES) or DVB descrambling

    Support for Basic Interoperable Scrambling System (BISS) conditional access for a single key for 32 programs

    DVB Common Interface (DVB-CI) support for CAM-based conditional access

    4:2:0 HD MPEG-4 AVC and MPEG-2 1080i and 720p decoding

    4:2:0 SD MPEG-4 AVC and MPEG-2 decoding

    Aspect ratio conversion (4:3, 16:9, 14:9) with Active Format Descriptor (AFD) control for SD programs

    AFD support for down-conversion of HD programs with aspect ratio conversion

    ASI output

    Closed captioning support for EIA-608 and EIA-708

    MPEG and Dolby Digital (AC-3) audio decoding

    DVB or Imitext subtitling

    Four audio outputs providing either two stereo pairs or four mono channels of balanced audio, each with the ability to use part of the output for applications such as second audio program (SAP), cue tones, etc.

    Uplink addressable decoder output control, including vertical blanking interval (VBI) data, audio routing, DPI, and ASI output

    Fingerprint trigger for the decoded program

    Field upgradeable software and security

    Simple Network Management Protocol (SNMP) for setup, control, and monitoring

    Front panel liquid crystal display (LCD) for control and monitoring

    Web browser interface for easy setup, control, and monitoring

    DVB-VBI and SCTE-127 support

    Dual-tone multifrequency (DTMF) cue tone and cue trigger outputs for advertisement insertion

    Digital program mapping providing uplink control for service replacements in blackout areas

    Live event control support

    Satellite Disaster Recovery support with Cisco PowerVu Network Center uplink control (PNC12.5 or higher)

Share your knowledge of this product. Be the first to write a review »